PRODUCTS
Automated Storage & Retrieval System (ASRS)
IntelliStock Series



- Fully Automated Storage System at near WIP
- Extremely compact
- SMIF, FOUP, Open Cassette, Reticle Pod or any other carrier compatible
- Class 10 or Class 100 clean
- Modular and expandable
- SEMI E88 compliant interface with MCS
- Compatible with Overhead Transport System
- User friendly GUI
- Optional additional I/O Port
- SEMI S2/S8 Compliant
- Possible integration into fab-wide AMHS
- Self teaching
- Inert Gas closed circuit option
- CE Certified

.
T-Type Stocker

- Compact & Density Storage
- Up to 12M long, 5.5M tall 740 positions Capacity
- Only 1.3M wide
- Typically US$300K per unit (for 250 to 400 8” box)
- ISO Class 4 clean. Class 3 with moderate evacuation (All axes above 2ft from ground)
- Well-proven dedicated stocker software (IntelliStock) with very intuitive Graphic User Interface
- Smooth acceleration & deceleration profiles
- High throughput (180 to 220 transactions per hour)
- Seamless integration with IntelliMove and IntelliSched
- On-Gripper camera that aids teaching
- SEMI-E88 (Stocker SEM) Fully Compliant
.
H-Type Stocker

- Use H-Robot that can be extremely tall (up to 16M )
- Suited for Large Capacity Storage together with Inter-Floor Transport capability
- Lowest Cost in the industry
- Class 10 Clean (Class 1 optional) Fed Std 209E
- Class 1 (ISO Class 3) with Low Pressure Vacuuming
- SEMI E88 Connectivity to MCS
- Simple and intuitive operation screen
- Up to 4m wide and 14m tall shelf area
.
R-Type Radial (Tower) Stocker


- Suitable for low to mid-size storage system
- Small Footprint (5’x5’ to 6’ x6’ typical.)
- Dual role as Inter-Floor transport System
- Lowest Cost for smaller capacity
.
Zero Footprint Stocker - ZFS

- Overhead stocker system, connected directly to overhead conveyor/OHT system
- Input and Output port can be from the side and the front of the Robot. Multi layer.
- Using Wireless Power Transmission (WPT)
- The side port can be anywhere along the panel. For faster throughput, it is advisable that the port is in the middle of the stocker.
- I/O lifter can straight connect to the stocker as well.